1641cc Turnkey Engine, Dual Port Single Carburetor
The 1641cc Dual Port Engine is one of the most dependable and economical replacement VW engine today. The introduction of the dual intake port cylinder head, improved carburetion, and oiling and cooling designs, significantly increased performance and reliability over previous Volkswagen models.
- 100% Remanufactured to OE Specs
- 69mm Stroke X 87mm Bore (Manual Transaxles)
- New Pistons and Liners
- 60HP
- New HD 30mm gear Oil Pump
- New 34 PICT Carburetor
- New Generator
- New 009 Distributor
- New Ignition Coil
- New Ignition Wires
Our Turnkey Engines come with rebuilt crankshaft, connecting rods and flywheel. This engine is designed for use with VW manual transaxles and has been hot-run tested for guaranteed performance. It includes a late model dual oil pressure relief case, rebuilt dual or single port heads and reconditioned fan shroud and metal. These designs ensure that you’ll receive the most reliable and maintenance-free engine available for your VW today. To top it off, our Volkswagen 1641cc Turnkey Engine is backed by a 12 month warranty.
NOTE: This item ships Truck Freight, please call for a quote.
Helpful Hints on Removing & Installing Air-Cooled VW Engines
1. To simplify reconnection of the wires and plugs, attach identifying tags to each as you disconnect them.
2. When under the vehicle, pull off the fuel hose and plug it quickly to avoid gas spillage and fire hazards. Do not smoke or work near heaters or other fire hazards. Have a fire extinguisher handy.
3. Check the clutch release bearing for wear. Replace it if needed. Roughen the plastic facing with an emery cloth and rub in molybdenum disulfide grease.
4. Make certain that the crankcase is filled with oil.
5. When installing the engine, put the transmission in gear, set the parking brake, then hand-turn the crankshaft or one rear wheel until the splines mesh. (Careful not to damage the transmission rear driveshaft or the clutch driven plate.)
